Magnum Venus Plastech CB-8000-xxx Resin Monitor - Manual (Page 13)

INSTALLATION AND OPERATIONS MANUAL CB-8000-XXX
MAGNUM VENUS PLASTECH REV 1.05
APRIL 2013 PAGE 13
CHAPTER 4-Programming
The CB-8000-XXX basic functions are factory set to run out of the box. Only two adjustments need to be made to
each panel meter to match up to the displacement of the fluid section that it is being installed on and set the
decimal point display.
Setting up the CB-8000-xxx for operation.
The CB-8000-xxx material monitoring system utilizes Red Lion panel meter as displays. Large displays are LD2006P0
and the smaller display is a CUB5. Utilizing the following instructions, the decimal point and scale factors need to
be set in each display.