beautypg.com

Frp system one, Quick list, Quick list instructions – Magnum Venus Plastech System One FRP 1100-1-1 User Manual

Page 4

background image

FRP SystemOne

1

FRP SystemOne

Quick List

NOTE: These instructions include resin and catalyst pressurization procedures.
To avoid equipment malfunction or possible injury, please follow these
instructions. If you have any questions, please contact our Technical Service
Department at 800-448-6035.

Chapter

1

1.

Check & fill solvent system

2.

Check & fill resin & catalyst supply

3.

Place suction wand in resin supply

4.

Prime resin pump

5.

Prime catalyst pump and set catalyst percentage

6.

Check system for fluid leaks

7.

Set air pressure to gun/chopper

8.

Install turbulent mixer in mix chamber

9.

Select spray tip, flow nozzle or convergence tip

10. Check chopper motor, rubber roller adjustment

11. Attach chute & cover

12. Adjust fan pattern

13. Adjust chop pattern

Quick List Instructions

Start-Up Sheet