Magnum Venus Plastech System One FRP 4102-00-01 - Manual (Page 7)

FRP SystemOne 4
FRP SystemOne
Catalyst Surge Chamber Disassembly
Chapter
3
1. Loosen the 4101-18-1 (Jam Nut), and remove the 4104-7-1 (Gauge
Adapter) from the 4104-4-1 (Surge Relief Valve Body).
2. Remove and discard the 7301-4-013 (O-Ring).
3. Remove the 4104-6-1 (Return Tube Fitting) from the 4104-4-1
(Surge Relief Valve Body).
4. Remove and discard the 7301-4-013 (O-Ring), and the 9201-1-4
(1/8” SS Ball).
NOTE
This is all the disassembly that is required to install the repair This is all the disassembly that is required to install the repair This is all the disassembly that is required to install the repair This is all the disassembly that is required to install the repair This is all the disassembly that is required to install the repair
kit. Further disassembly is required if there is a problem with kit. Further disassembly is required if there is a problem with kit. Further disassembly is required if there is a problem with kit. Further disassembly is required if there is a problem with kit. Further disassembly is required if there is a problem with
the 8701-1-1 (Burst Disc). the 8701-1-1 (Burst Disc). the 8701-1-1 (Burst Disc). the 8701-1-1 (Burst Disc). the 8701-1-1 (Burst Disc).
NOTE
Once disassembly is complete all parts should be flushed in Once disassembly is complete all parts should be flushed in Once disassembly is complete all parts should be flushed in Once disassembly is complete all parts should be flushed in Once disassembly is complete all parts should be flushed in
distilled water and inspected for damage and replaced if distilled water and inspected for damage and replaced if distilled water and inspected for damage and replaced if distilled water and inspected for damage and replaced if distilled water and inspected for damage and replaced if
necessar necessar necessar necessar necessaryyyyy.....