Magnum Venus Plastech System One FRP 4102-00-01 - Manual (Page 5)

FRP SystemOne
FRP SystemOne
Disassembly of Metering Pump
2
Chapter
2
1. Remove 4101-15-1 (Check Valve Body) from 4101-14-1 (Outlet
Body) and remove and discard the two 7301-4-013 (O-Rings).
2. Remove the 4107-17-1 (Spring Retainer) and 4101-16-1
(Compression Spring) from the 4101-15-1 (Check Valve Body),
and remove and discard the 9201-1-7 (7/32” SS Ball).
3. Loosen 4101-1-1 (Lock Nut) and unscrew the 4101-14-1 (Outlet
Body) from the 4102-6-1 (Cylinder).
4. Remove the 4102-9-1 (Seal Retainer) from the 4102-7-1 Piston
Body.
5. Remove and discard the 7304-1-1 (Piston Seal).
6. Remove the 4102-7-1 (Piston Body) from the 4102-2-1 (Piston
Rod).
WARNING
Before removing Metering Pump and Surge Chamber assembly Before removing Metering Pump and Surge Chamber assembly Before removing Metering Pump and Surge Chamber assembly Before removing Metering Pump and Surge Chamber assembly Before removing Metering Pump and Surge Chamber assembly
from the Slide Drive, be sure to bleed the fluid pressure from the from the Slide Drive, be sure to bleed the fluid pressure from the from the Slide Drive, be sure to bleed the fluid pressure from the from the Slide Drive, be sure to bleed the fluid pressure from the from the Slide Drive, be sure to bleed the fluid pressure from the
system; before disconnecting any hoses or tubes. System may be system; before disconnecting any hoses or tubes. System may be system; before disconnecting any hoses or tubes. System may be system; before disconnecting any hoses or tubes. System may be system; before disconnecting any hoses or tubes. System may be
under pr under pr under pr under pr under pressur essur essur essur essure and could cause injur e and could cause injur e and could cause injur e and could cause injur e and could cause injuryyyyy.....