Magnum Venus Plastech PATRIOT PAT-CCP-LS-0590-SS - Manual (Page 22)

PAT-CCP-LS-0590 Chop Check Fluid Section Manual
Rev. 02/2012 Page | 22
9. Thread the Packing Nut (PAT-CCP-0504) into the top of the Outlet Body.
10. Apply a light coat of the appropriate grease to the Backup Ring (PAT-CCP-0515)
then install into the top end of the Cylinder.
11. Apply a light coat of the appropriate grease to the Piston Seal Assembly (PAT-
CCP-0514) then install it into the top end of the Cylinder on top of the Backup
Ring, o-ring facing up.
12. Install the Piston Bushing (PAT-CCP-0513) into the top of the Cylinder.
13. Apply a light coat of the appropriate grease onto O-ring (O-E-140) and install onto
the end of the Cylinder.
14. Install the Cylinder into the Outlet Body.
15. Apply a light coat of the appropriate grease onto the Fluid Rod assembly, now
carefully push the Fluid Rod Assembly into the Cylinder, Piston Seal and Rod Seal
Assemblies (PAT-CCP-0516) from the bottom and then up through the Packing
Nut (PAT-CCP-0504).
Rod Seal Assembly (PAT-CCP-0516)
Rod Bushing (PAT-CCP-0505)
Outlet Body
Packing Nut (PAT-CCP-0504)
Piston Bushing (PAT-CCP-0513)
Piston Seal Assembly (PAT-CCP-0514)
Backup Ring (PAT-CCP-0515)
O-Ring (O-E-140)
Cylinder