Level Mount LM50HDCC - Manual (Page 4)

Attaching Extension Arms:
(Note: Some models not included)
4. If you have an oversized LCD/ Plasma TV, you may need
to use the Extension Arms provided. If you need to use
the Extension Arms, you must use all Extensions Arms in
order for the Mount to properly hold your TV.
It is recommended to measure the distance between
the mounting holes on the back of your TV prior to
attaching the Extension Arms. The muliple hole pattern
on the Extension Arms make it easy to adjust to fit your
unique television (Figure 7).
Attach the Extension Arms to the Tilt Arms by threading
the M5 bolts (V) into the provided Lock Washer (W),
through the Extension Arm, through the Tilt Arms and
tighten with the provided Hex Nut (X). 2 M5 bolts must
be used per Extension Arm.
Note: The locking mechanism should face the outside
of the upper left and right Extension Arms. The Locking
Lever may have to be unfastened and reattached when
adjusting the Extension Arms.
Locking the Display (Using the Fixed Option):
To attach the Locking Latch to the Tilt Arm you will need
the hardware from Bag 8. Line up the L-Shape Lock
according to the picture in Figure 9. Place the M5 Bolt
(Z) through L-Shape Lock (Y) and through the Tilt Arm.
Then tighten the bolt using the provided Hex Screw
(AA). You will then need to attach the second M5 bolt
by threading it through the L-Shape Lock (Y), through
the Tilt Arm and tighten with the Butterfly Nut (BB) as
shown in Figure 10. The Butterfly Nut can be loosened
or tightened so that the Tilt Arm can be locked to the
Wall Plate (Figure 11, 12).
www.LevelMount.com
1-888-229-1459
©2008 Level Mount
Patents Pending
Upper Extension
Arms
Lower Extension
Arms
Locking
Lever
Figure 7
Figure 8
Figure 9
Figure 10
Figure 11
Figure 12