Lectrosonics Venue (Narrowband) - Manual (Page 20)

Venue Narrowband Receiver
USB Driver Installation (Windows 2000) -
First Time
Use the following procedure when a LecNet2 ™ device is
connected to the Windows 2000-based PC for the first
time.
1. Connect a USB cable between the Venue Receiv­
er’s USB port and the USB port on the computer
system. Place the LecNet2 ™ Installation Disk in the
PC’s CD-ROM drive and click “ Next >” to display
the next page.
2. Select Search for a suitable driver for my device
(recommended) and click “Next >” to continue.
3. Check only CD-ROM drives then click “Next >” to
search the LecNet2 ™ CD for the USB driver.
4. When the driver is found, the LecNet2 ™ device
name will be displayed along with the location of the
driver. Click “ Next >” to install the driver.
5. Click “Finish” when the installation is complete.
USB Driver Installation (Windows 2000)
Subsequent Installations
Once the LecNet2 ™ USB driver is installed in a Win­
dows ® 2000 system device, subsequent LectNet2 USB
devices will invoke the Found New Hardware Wizard
which will automatically load the LecNet2 ™ USB driver
for the new device.
LECTROSONICS, INC. 20