Lectrosonics Venue (Narrowband) - Manual (Page 19)

Digital Hybrid Wireless™ Modular Receiver System
5. When the driver installation is complete, the final
page of the Wizard appears. Click “Finish” to close
the Found New Hardware Wizard.
USB Driver Installation (Windows XP) -
Subsequent Installations
The Windows XP operating system regards all Lec­
Net2 ™ devices as separate USB devices because each
has a unique serial number. Windows XP will want to
install the USB driver every time it encounters a Lec­
Net2 ™ device whose serial number it does not recog­
nize. The process is simplified if the LecNet2 ™ USB
driver has already been installed at least once on the
computer system. Use the following procedure if the
LecNet2 ™ USB driver was previously installed on the
computer system.
1. On the first page of the Wizard, select Install the
software automatically Recommended) then click
“Next >”.
3. When the driver installation is complete, the final
page of the Wizard appears. Click “Finish” to close
the Found New Hardware Wizard.
2. Windows will discover the previously installed
driver. If a dialog box opens warning you that the
driver has not passed Windows Logo Testing, click
“Continue Anyway.”
Rio Rancho, NM, USA 19