Lectrosonics Venue (Narrowband) - Manual (Page 17)

Digital Hybrid Wireless™ Modular Receiver System
Selected Receiver
Battery Types for Each
Receiver Module
Current
Transmitter
Battery Voltage
(when available)
2. Select each receiver module with the Receiver
Select Button and set the battery type being used in
the corresponding transmitter.
9V ALK Transmitter uses a 9V alkaline battery.
Monitor voltage with battery icon in main
window.
9V LTH Transmitter uses a 9V lithium battery. Moni­
tor voltage with battery icon in main window.
9V TIM Transmitter uses a 9V battery. Display its
voltage normally in the battery level window
but monitor its status with the battery timer
in the main window.
AA ALK Transmitter uses a AA alkaline battery.
Monitor voltage with battery icon in main
window.
AA LTH Transmitter uses a AA lithium battery. Moni­
tor voltage with battery icon in main window.
AA TIM Transmitter uses an AA battery. Display its
voltage normally in the battery level window
but monitor its status with the battery timer
in the main window.
The 9V TIM and AA TIM settings are most useful for re­
chargeable batteries, all or most of which do not exhibit
reliably identifiable voltage drops as they discharge.
In compatibility modes other than 400 Series and 200
Series, no battery telemetry information is available so
the TXBAT setup screen offers only two choices:
NOTIMER Display no transmitter battery status in the
main window.
TIMER Monitor the transmitter battery status with
the battery timer in the main window.
If the selected receiver module is part of a ratio
diversity pair, the battery type will be automatically
set for both units in the pair. If the selected receiver
module is part of a frequency diversity pair, the
battery type is set independently for each receiver
in the pair since there are two transmitters in use.
3. When either the AA TIM or 9V TIM (timer) mode
is selected, press the Function Button to reset
(“ZERO”) the timer.
Press the Function Button
to Reset (ZERO) the Timer
Selected Receiver Elapsed Time
is Highlighted
Battery status is displayed on the receiver detail screen,
the overview screen and the info screen.
Battery Gauges
The display
changes to a
numerical readout
when a timer mode
is selected.
Locking Out the Front Panel Controls
Navigate to the LockSet setup screen.
Rotate the MENU/SELECT control to the LOCKED or
NOT LOCKED setting and press the control.
When LOCKED is selected, no changes can be made
to the configuration with the front panel controls. If an
attempt is made to change a setting, the LCD will flash
a reminder that the controls are locked.
Rio Rancho, NM, USA 17