Impulse 2223-OEM - Manual (Page 8)

Verifying Installation
To confirm that the drivers have been successfully installed, you can look in Device
Manager under ‘Ports (COM &LPT)’ and each of the ports you installed will be
included on the list with their associated COM numbers. To access Device Manager,
follow the steps below:
1. Right-click on the ‘My Computer’ icon on your desktop or in the Start menu.
2. Click on ‘Properties’ in the fly out menu to launch the ‘System Properties’
window.
3. Click on the ‘Hardware’ tab and then click on the ‘Device Manager’ button.
4. When Device Manager launches, look under ‘Ports (COM & LPT)’ to verify that
the serial ports have been correctly installed (screenshot of 2833 shown; only
two ports will be listed for the 2223).
Note: Your system will assign the next available COM numbers which may
vary for each computer used.
© Sealevel Systems, Inc. - 6 - SeaLINK+2.SC User Manual