Impulse 2223-OEM User Manual
Page 19
Select the ‘BERT’ tab and with the loopback connected to the port you
wish to test, click on the ‘Start’ button. If testing RS-485, be sure that
ECHO is enabled. (Pictured below)
If the COM port is working properly, the green light will glow and the
Transmit Frames and Receive Frames will increase. The Tx and Rx Data
Rates will show the calculated data rate. (Pictured below)
You can continue testing this port with different configurations or
proceed with testing other ports, if necessary.
If these steps do not solve your problem, please call Sealevel Systems’ Technical
Support, (864) 843-4343. Our technical support is free and available from 8:00 AM
to 5:00 PM Eastern Time Monday through Friday. For email support, contact
© Sealevel Systems, Inc.
- 17 -
SeaLINK+2.SC User Manual