Impulse 2223-OEM - Manual (Page 6)

Installation & Configuration
Software Installation
Windows 98/ME/ 2000/XP/Vista™ Operating Systems
1. Start Windows.
2. Insert the Sealevel Software CD in to your CD/DVD drive.
3. If ‘Auto-Start’ is enabled the installation window will automatically appear.
Otherwise, navigate to the root directory of your CD drive and double-click the
‘autorun.exe’ application to launch the installation window.
4. Click the ‘Install’ button.
5. Type in your part number (2223) or select your adapter from the listing.
6. Click the ‘Install Drivers’ button.
7. The setup file will automatically detect the operating environment and install the
proper components.
To confirm that the SeaCOM driver has been successfully installed, click on the
‘Start’ button, and then select ‘All Programs’. You should see the ‘SeaCOM’
program folder listed.
You are now ready to proceed with connecting the 2223 to your system. Refer to the
Hardware Installation section for details.
Windows NT is not USB aware and thus cannot
support this device.
© Sealevel Systems, Inc. - 4 - SeaLINK+2.SC User Manual