Impulse 2113 - Manual (Page 17)

Mounting Options
DIN Rail Mounting
SeaLINK USB serial adapters ship ready for
mounting on DIN rail. A small, rugged plastic
clip (shown below) is included that snaps onto
35mm DIN rail. This offers a clean installation by
locating the USB serial adapters near the industrial
control equipment on the DIN rail. Additionally,
innovative SeaLATCH locking USB ports help
prevent accidental USB cable disconnection.
Wall/Panel Mounting
As an alternative to DIN rail, the versatile plastic
clip includes mounting holes that allow SeaLINK
USB serial adapters to be mounted to walls, under
counters, or inside panels. The plastic clip can be
permanently mounted to a surface while still
allowing the SeaLINK serial adapter to be easily
removed for service or configuration changes.
Table/Desktop Mounting
SeaLINK USB serial adapters are perfect for table
or desktop use. The units ship with four rubber
feet that help prevent the devices from sliding due
to vibration and help protect surfaces from
scratches. The small enclosures take up very little
space.
© Sealevel Systems, Inc. - 15 - SeaLINK DIN Rail USB Serial Manual