Impulse 2113 - Manual (Page 14)

Software Installation Instructions
Windows 98/ME/2000/XP/Vista™ Operating Systems
Do not connect the device to a USB port until the software is installed.
1. Start Windows.
2. Insert the Sealevel Software CD in to your CD drive.
3. If ‘Auto-Start’ is enabled the installation window will automatically appear. Otherwise,
navigate to the root directory of your CD drive and double-click the ‘autorun.exe’ application
to launch the installation window.
4. Select ‘Install Software’.
5. Select the Part Number for your device from the listing.
6. The setup file will automatically detect the operating environment and install the proper
components. Follow the information presented on the installation screens that follow.
7. A screen may appear with the declaration: “The publisher cannot be determined due to the
problems below: Authenticode signature not found.” Please select the ‘Yes’ button and
proceed with the installation. This declaration simply means that the Operating System is not
aware of the driver being loaded. It will not cause any harm to your system.
8. During setup, you may specify installation directories and other preferred configurations.
This program also adds entries to the system registry that are necessary for specifying the
operating parameters for each driver. An uninstall option is included to remove the driver and
all registry/INI file entries from your system.
9. Proceed with the physical installation of your SeaLINK USB serial adapter.
NOTE:
Windows NT is not USB aware and thus cannot support this device.
© Sealevel Systems, Inc. - 12 - SeaLINK DIN Rail USB Serial Manual