Controlled Products Systems Group E-960-D190Q - Manual

E-964-D390Q* 390 ft. (120m) 790 ft. (240m)
E-960-D290Q 290 ft. (90m) 590 ft. (180m)
E-960-D190Q 190 ft. (60m) 390 ft. (120m)
E-960-D90Q 90 ft. (30m) 190 ft. (60m)
Manual
* Multi-frequency version
SECO-LARM
12
NOTICE: The information and specifications printed in this manual are current at the time of publication. However, the
SECO-LARM policy is one of continual development and improvement. For this reason, SECO-LARM reserves the right to
change specifications without notice. SECO-LARM is also not responsible for misprints or typographical errors.
Copyright © 2010 SECO-LARM U.S.A., Inc. All rights reserved. This material may not be reproduced or copied, in whole or in
part, without the written permission of SECO-LARM.
.A . C - SECO-LARM U.S.A., Inc.
16842 Millikan Avenue, Irvine, CA 92606
Tel: 800-662-0800 / 949-261-2999 Fax: 949-261-7326
Website: www.seco-larm.com
E-mail: [email protected]
WARRANTY: This SECO-LARM product is warranted against defects in material and workmanship while used in normal
service for a period of one (1) year from the date of sale to the original consumer customer. SECO-LARM’s obligation is
limited to the repair or replacement of any defective part if the unit is returned, transportation prepaid, to SECO-LARM.
This Warranty is void if damage is caused by or attributed to acts of God, physical or electrical misuse or abuse, neglect,
repair, or alteration, improper or abnormal usage, or faulty installation, or if for any other reason SECO-LARM determines that
such equipment is not operating properly as a result of causes other than defects in material and workmanship.
The sole obligation of SECO-LARM, and the purchaser’s exclusive remedy, shall be limited to replacement or repair only, at
SECO-LARM’s option. In no event shall SECO-LARM be liable for any special, collateral, incidental, or consequential personal or
property damages of any kind to the purchaser or anyone else.
file:DTP\Manual\MIE964-D_remove_R_P1008.pmd
PITSW3
Also available from SECO-LARM:
E-964-Q165Q E-932-D33TBQ E-9622-4B25
• Available in 4, 6, 8 or 10 beams.
• Range: 25 ft. outdoor,
50 ft. indoor.
• Slim-line design 7 /
8
" x 1 5 /
16
”.
• Weatherproof IP65 construction.
• Triggers on breaking of any
single or 2 adjacent beams
(programmable).
• E-932-D33TBQ – Photoelectric
Through-Beam Sensor.
• E-932-S16RRQ – Photoelectric
Reflective-Beam Sensor.
• Suitable for entrances, hallways,
room in office or home.
• Fits single-gang box.
• Adjustable alignment angle from
+/- 15 ooooo horizonatally /
vertically.
• 4 models available.
• Up to 660 ft. (200m).
• Selectable 4-channel beam
frequency.
• Built-in heater.
• Buzzer for beam alignment.
• Weatherproof, sunlight-filtering
case for indoor and outdoor use.
• Quick, easy installation with
built-in laser beam alignment
system.
Quad Photobeam Detectors
E-932-S16RRQ
Flush-Mount Photobeam Sensors Curtain / Barrier Sensors
Other versions available
Note: Products with model numbers that end with "Q" or that have a round green"Q"sticker are RoHS compliant.
Twin Photobeam Detectors
M l Model # M l Model # O oor ang Outdoor Range O r ng oo a Outdoor Range I oor an e Indoor Range r n I oo a e Indoor Range