CNB SDF1212 - Manual (Page 37)

37
6. Network Client Software
The DVR provides a live remote monitoring feature. Remote monitoring requires installation of a software
client program on your PC. A LAN connection using the RJ45 connector on the rear panel is mandatory for
remote connection. For detailed features of the client program, please refer to the client program user guide.
For local operation purposes, the frame rate is limited to 1 frame/sec when there is no recording operation in
the DVR. When recording is under progress, video frame rate for the live monitoring will follow the recording
frame rate.
6-1. Overview
The remote software supports recording, remote live viewing, search, playback and system configurations.
By installing the Network Client Software on a Window PC, you can monitor real-time and recorded images
via optional Ethernet network. This includes the ability to monitor video, playback recorded video and change
operating parameters.
DVR allows maximum 4 users to access by network. In high bandwidth network,
maximum 4 user can access on one DVR. In low bandwidth network, one user
network access is highly recommended.
6-2. Minimum PC requirements
Before installing the client software, check the PC specifications. The Network Client Software may not
perform correctly if the PC does not meet the minimum requirements.
Minimum Recommended
CPU Intel Pentium Ⅲ Intel Pentium Ⅳ
500Mhz 2Ghz
Memory 128MB 256MB
VGA Super VGA - 16MB Super VGA - 64MB
Resolution 1024x768 1024x768
Disk space 10MB 10MB
OS Windows 2000 Windows 2000,
Professional, XP
Network 10/100Base T 10/100Base T
Others Direct X 8.1 Direct X 8.1 or Higher