CNB SDF1212 - Manual (Page 11)

11
1. Front Panel
The following information will help you operate the front panel controls.
Figure 1.1 Front panel
LED Indication
POWER: LED light is on when power is applied to the system.
REC: LED light is on when the system is recording video data.
HDD: LED light is on when the system is accessing video data.
EVENT: LED light is on when alarm sensor(s) is/are triggered or motion is detected.
NETWORK: LED light is on when client is connected to the system through the network.
Front panel buttons
SEQUENCE: Press to start auto sequencing of the screen in full screen mode. (Toggle)
REC: Press to start and stop manual recording.
ARCHIVE: Press to start operations involving archiving in live or playback mode.
PTZ: Press to control PTZ operation
SETUP: Press to launch SETUP menu.
SEARCH: Press to go to the search menu. Event search /Time line search /Log /Archive search
ESC: Press to return to previous menu screen.
: Press to move up the menu items in setup mode and to select camera 1 in live mode. It is also
used as the number 1 when entering password.
: Press to move right in the menu or to change the values in setup mode and to select camera 2 in live
mode. It is also used as the number 2 when entering password.