KT&C KVR-0412H - Manual (Page 64)

64
4.6.3 Video Loss
 Please click ( ) LINK>Video Loss and the following screen will appear.
 Select alarm outputs and set up E-mail addresses for notification when Video Loss occurs.
 Link Notification displays E-mail addresses registered in DEVICES>Network>Notification.
 Please follow the setup procedures below.
① Click ( ) Video Loss frame and select Video Loss 1.
② Select cameras for recording when Video Loss 1 is on. Please check  a check box under Link Camera. More than two
cameras can be set.
③ Select alarm outputs to be worked when Video Loss 1 is on. Please check  a check box under Link Alarm Out or R1~2.
More than two alarm outputs can be set.
④ Select E-mail addresses for notification when Video Loss 1 is on. Please check  a check box under Link Notification.
More than two E-mail addresses can be set.
⑤ Repeat the above procedure for Video Loss 2~ Video Loss 16.
 Click No Beep  to deactivate alert sounds from video loss. Apply to all channels.
 Choose ‘OK’ to confirm the setting.
4.6.4 Serial In
 Please click ( ) LINK>Serial In and the following screen will appear.
 Select cameras for recording while the Serial In is in operation and alarm outputs and set up E-mail addresses for
notification.
 Link Notification displays E-mail addresses registered in DEVICES>Network>Notification.
 Please follow the setup procedures below.
① Click ( ) Video Loss frame and select Serial In 1.
⑥ Select cameras for recording when Serial In 1 is on. Please check  a check box under Link Camera. More than two
cameras can be set.
⑦ Select alarm outputs to be worked when Serial In 1 is on. Please check  a check box under Link Alarm Out or R1~2.
More than two alarm outputs can be set.
⑧ Select E-mail addresses for notification when Serial In1 is on. Please check  a check box under Link Notification. More