Hach-Lange GANIMEDE N - Manual (Page 39)

39
Operation
Data
Current
After a connection to the analysis unit has been established, a list of current
measurement results is shown.
In addition to the mean value, both single results and single absorbances are
displayed for a double determination. Measurement results that are beyond the
selected measurement range are shown in red.
Note: A new measurement can be started only if the results of the previous
measurement are transferred completely to the open-loop control unit and the
indicator display of the analysis unit is no longer flashing.
Express as The sample name can be changed.
Unit The unit mg/L, g/L, µg/L, mmol/L, mg/100 g or Ext. can be changed.
Dilution If the dilution factor is changed, the result is calculated again automatically.
Factor If the sample-specific factor is changed, the result is calculated again automatically.
Sampling The date and time of the sampling can be changed
Note The comment on the sample, a maximum of 30 characters long, can be changed
Display Display of all saved measurement results for the individual sample batches.
Data/display Selection list of all saved sample batches. Select the desired sample batch.
Output
Output of the saved measurement results of the different sample batches to the PC,
printer or a LIMS system.
PC
Transfer of the measurement results to the PC via the RS 232 interface of the
open-loop control unit.
Printers
Transfer of the measurement results to the analysis unit by means of the IR interface
and then on to the printer via the RS 232 interface of the analysis unit.
LIMS
Transfer of the measurement results to the analysis unit by means of the IR interface
and then on to the LIMS system via the RS 232 interface of the analysis unit.
4.2.1 Menu structure