Hach-Lange GANIMEDE N - Manual (Page 37)

37
Operation
Edit
Program Create and save a new sample batch
Phosphorus Definition of a sample batch for phosphorus
Name Name, maximum 20 characters long, for the sample batch e.g. Well 1-10
Users
Name of the user. The usernames must be defined beforehand under the menu
option EDIT, USER.
Measurements Single or double determination
Calibration
Two-point calibration with two selectable standard concentrations or
Multi-point calibration with access to standard curve 1, 2 or 3 (the standard curve
must first be recorded under the menu option ANALYSIS, CALIBRATION)
Sample data Opens an input window for the description of individual samples.
Position Automatic numbering (1–36)
Sample Sample name, maximum 13 characters long
Method Total phosphate or orthophosphate
Express as PO
4
, PO
4
-P or P
2
O
5
Unit Selection of the unit mg/L, g/L, µg/L, mmol/L, mg/100 g or Ext.
Control standard
A control standard with freely selectable concentration and permissible deviation can
also be measured on the sample tray.
Control standard selection YES or NO.
Dilution The selection of a dilution factor against which the result is to be offset
Factor Freely definable specific sample factor (0.001 – 9999)
Sampling Date and time of sampling
Note Note regarding the sample, maximum 30 characters long
Nitrogen Definition of a sample batch for nitrogen
Name Name, maximum 20 characters long, for the sample batch e.g. Well 1-10
User
Name of the user. The usernames must be defined beforehand under the menu
option EDIT, USER.
Measurements Single or double determination
Calibration
Two-point calibration with two selectable standard concentrations in the low and high
measurement range respectively or
Multi-point calibration with access to standard curve 1, 2 or 3 (the standard curve
must first be recorded under the menu item ANALYSIS, CALIBRATION)
Sample data Opens an input window for the description of individual samples.
Position Automatic numbering (1–36)
Sample Sample name, maximum 13 characters long
Method Low measurement range (0.5–30 mg/L TN
B
) or high (30–150 mg/L TN
B
)
Express as TN
Unit Selection of the unit mg/L, g/L, µg/L, mmol/L, mg/100 g or Ext.
Control standard
A control standard with freely selectable concentration and permissible deviation can
also be measured on the sample tray.
Control standard selection YES or NO.
Dilution The selection of a dilution factor against which the result is to be offset
Factor Freely definable specific sample factor (0.001 – 9999)
Sampling Date and time of sampling
Note Note regarding the sample, maximum 30 characters long
4.2.1 Menu structure