Hach-Lange GANIMEDE N - Manual (Page 38)

38
Operation
Modify Saved sample batches can be modified.
Modify Selection list of all saved sample batches. Select the desired sample batch.
Name Name, maximum 20 characters long, for the sample batch e.g. Well 1-10
User
Name of the user. The usernames must be defined beforehand under the menu
option EDIT, USER.
Measurements Single or double determination
Calibration
Two-point calibration with two selectable standard concentrations or
Multi-point calibration with access to standard curve 1, 2 or 3 (the standard curve
must be recorded under the menu option ANALYSIS, CALIBRATION)
Sample data Opens an input window for the description of individual samples.
Position Automatic numbering (1–36)
Sample Sample name, maximum 13 characters long
Method
Total phosphate or orthophosphate and/or
low measurement range (0.5–30 mg/L TN
B
) or high (30–150 mg/L TN
B
)
Express as
PO
4
, PO
4
-P or P
2
O
5
or
TN
Unit Unit selection mg/L, g/L, µg/L, mmol/L, mg/100 g or Ext.
Control standard
A control standard with freely selectable concentration and permissible deviation can
also be measured on the sample tray.
Control standard selection YES or NO.
Dilution The selection of a dilution factor against which the result is to be offset
Factor Freely definable specific sample factor (0.001 – 9999)
Sampling Date and time of sampling
Note Note regarding the sample, maximum 30 characters long
Erase The saved sample batch can be erased
Erase Selection list of all saved sample batches. Select the desired sample batch.
Copy The saved sample batch can be saved under a new name.
Copy Selection list of all saved sample batches. Select the desired sample batch.
Users Up to 19 usernames with maximum 10 characters.
New Definition of a new username
Erase Deletion of a username
Dilution
Display of nine predefined dilution stages that can be changed individually. A further
11 dilution stages can be saved.
New Definition of a new dilution stage
Erase Deletion of a dilution stage
4.2.1 Menu structure