Hach-Lange GANIMEDE N - Manual (Page 27)

27
Installation
7. The sample tray is subsequently turned automatically to the correct position and the
sample needle dips into the rinsing solution.
Note: A sample stray for 53 samples of 15 mL each is available for special applications.
The reset button on the front left-hand side of the housing is used for initialization of the
sample changer. The reset button must not be actuated during a sample series.
The green light-emitting diode on the front left-hand side of the housing indicates that the
sample changer is in operation.
3.2 Open-loop control unit
3.2.1 Overview of the display and keys of the open-loop control unit
Figure 13 Overview of the display and keys
Error messages
Error messages are shown in red on the display. Press the top menu key in order to be
able to continue to work.
Exit the menu
Press the top menu key.
Edit selection lists
Selection with the cursor keys. Press the enter key to confirm the selection.
Alphanumeric keys
Numbers, letters and special characters can be entered with the alphanumeric keys.
1 Menu keys 4 Display and input area
2 Shortcut keys 5 Cursor keys
3 Menu selection 6 Alphanumeric keys