Clear-Com PTX-3 - Manual (Page 6)

Vitec Group Communications
PTX-3 UHF Digital Hybrid IFB Transmitter
i i
Figure 1: Safety Symbols
SAFETY
Emission designator: 180KF3E
The T4 IFB transmitter is FCC type accepted under Part 74: 470 -
608MHz, 614 - 806MHz and 944.1 - 951.9MHz.
The FCC requires that the following statement be included in this
manual:
This device complies with FCC radiation exposure limits as set
forth for an uncontrolled environment. This device should be
installed and operated so that its antenna(s) are not co-located or
operating in conjunction with any other antenna or transmitter. A
separation distance of at least 20cm (8 inches) must be
maintained to comply with the FCC Radio Frequency Maximum
Permissible Exposure (MPE) requirements.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
This symbol alerts you to the presence of uninsulated dangerous
voltage within the product's enclosure that might be of sufficient
magnitude to constitute a risk of electric shock. Do not open
the product's case.
This symbol informs you that important operating and main-
tenance instructions are included in the literature accompanying
this product.