Software - configuration users, Normal access procedure, Antipassback – CAME Rbm84 User Manual
Page 54

cap. <
4
> pag. <
10
>
ENGLISCH
Software - CONFIGURATION USERS
Cap 4
Select the required access bands, for every day of the
week
Select the type of AntiPassBack (not compulsory)
The AntiPassBack is used to stop the fraudulent use of the access devices, for example by allowing
more than one vehicle to enter or persons with only one Radio-control or Card.
AntiPassBack Time limit means that the user, after passing the entrance, cannot pass back again
across the entrance way for all the time of the antipassback defi ned in Timings > Time bands
AntiPassBack In/Out means that the user, after passing through the entrance, can only enter again
after having left through the normal exit.
By leaving the default access as NORMAL, the Discount and
Prepaid areas are omitted.
The [ALL] button enables or disables all of the time bands.
If the time band appears red, this means it is blocked (for all
users) in Timings > Time Bands
A disabled time band hinders access; if the user is already
inside, the subtracted credits (as set in the following pages) will
be counted only for the PREPAID and PREPAID WITH TIME
LIMIT procedures
NORMAL access procedure
RBM 84 -Software
for every day
of the week
to adjourn
Antipassback
The bands change colour according to the
settings:
<> Black= entry/exit function
Red= Band Blocked
<< Blue= exit-only function
>> Brown= entry-only function
to adjourn