Fluid Components International CMF Series Manual Installation of Flow Element - Manual (Page 7)

Installation of sensor
FlexCOR
™
Model CMF Series 28
Fluid Components Intl
Document 06EN003327 Rev. -
Flow direction
The arrow on the sensor indicates the direction of flow defined as "positive" (the meter is able to
measure flow in both directions).
Forward Reverse
4.15 Vertifical mounting
in pipe
Locate the unit low in the pipe system in order to avoid low pressure in the sensor and consequent
air separaton in the liquid.
Multiple plug orientation
When mounting vertically, the orientation of the terminal box is not important, rotation, however, is
not allowed to exceed the stated angles of the sensor.
Multiple plug