Burkert Type 8035 - Manual (Page 10)

type of fluid conditions
8025
8035 1)
Fluid group 1 §
1.3.a
only DN25 DN ≤ 25
Fluid group 2 §
1.3.a
DN ≤ 32
or DN > 32 and
PNxDN ≤1000 DN ≤ 32
or DN > 32 and
PNxDN ≤ 1000
Fluid group 1 §
1.3.b
DN ≤ 25
or DN > 25 and
PNxDN≤ 2000
PNxDN ≤ 2000
Fluid group 2 §
1.3.b
DN ≤ 400 DN ≤ 200
1) For the type 8035 : S030 fitting-sensor, DN6 to DN65, in PP,
PVC, PVDF, brass or stainless steel.
6.3. General technical data
6.3.1. mechanical data
part material
Housing / seal PC / NBR
Cover with lid / seal PC / silicone
Front foil Polyester
M20x1.5 screw plugs / seal PA / neoprene
part material
Screws Stainless steel
Nut PC
Flow sensor (exposed to the
fluid) / seal (only with 8025) PVDF / FKM
Axis and bearings of the paddle
wheel ceramic
R=90
91
21
85.5
203
164.5
102
49.5
136
30
88
88
Fig. 3: Dimensions in mm of the 8025
8
Technicaldata
Type 8025/8035 battery powered
English