Valve construction, English – Burkert Type 6525 User Manual
Page 10

8 - 6524/6525
T
ECHNICAL
DESCRIPTION
english
Valve Construction
• Automation systems are increasingly used in all areas where control duties are to be performed. The
valves form thereby the interface between electronics and pneumatics.
• The valves Type 6524 and 6525 consist of a pilot rocker solenoid valve of Type 6104 and a pneumatic
seat valve. Pilot valve and housing are clipped together. The working principle enables the switching of
high pressures at low power consumption and with short switching times.
• The valves can be connected in series and provided with rear plug connector mainly for valve islands
(types 8640 or 8644) and with front connector lugs mainly on valve blocks for operating pneumatic
drives.
• The pilot valves are provided as standard with a manual actuator.
Fig: 3/2-way-solenoid valve for pneumatic systems
Type 6524
Fig.: 5/2-way-solenoid valve for pneumatic systems
Type 6525