Structure and function, Structure, Valve types – Burkert Type 2712 User Manual
Page 7: Handwheel, Position indicator, English, 7structure and function, Version änderungsnr. änderungstext datum, Blatt, Von bearbeiter projekt-nr. dokument-id

7
Structure and Function
6. structure anD functiOn
6.1. structure
The valve consists of a manual actuator and a 2/2-way valve body.
By manually actuating the handwheel, the force is transferred via a
spindle and the valve is opened or closed.
6.2. Valve types
Type
Body
Properties
2000
Angle seat body
- Manual actuator
- Without control cone
- For shut-off function only
2702
- Manual actuator
- With control cone
- With position indicator for
setting a defined flow
1)
2012
Globe valve body
- Manual actuator
- Without control cone
- For shut-off function only
2712
- Manual actuator
- With control cone
- With position indicator for
setting a defined flow
1)
1)
Possible with and without interlock to prevent intentional and
unintentional adjustment of the set valve position
Bürkert
D-74653 Ingelfingen
Version
Änderungsnr.
Änderungstext
Datum
Maße ohne Toleranzangabe
Materialnummer
Klass-Nr.
Maßstab:
Typ
Werkstoff
Unterlagenart
Ers.f.
SW
Blatt
2000
00219723
1
1
9000228212
von
Bearbeiter
Projekt-Nr.
Dokument-Id.
SK00
Rundungshalbmesser
Längenmaße
Winkelmaße
Ersteller
Name
Datum
Revision
Dok.art
XXX
Sprache
DE
Masse:
0.00
Zeichn.Nr.
Status
In Arbeit
DKI
Var.stl.:
g
An dieser Zeichnung beanspruchen wir Eigentums-
und Urheberrecht. Nur mit unserer Zustimmung
darf sie vervielfältigt, anderen mitgeteilt oder anderweitig verwendet werden.
Bürkert
Fluid Control Systems
D-74653 Ingelfingen
Version
Änderungsnr.
Änderungstext
Datum
Maße ohne Toleranzangabe
Materialnummer
Klass-Nr.
Maßstab:
Typ
Werkstoff
Benennung
Unterlagenart
Ers.f.
SW
Blatt
2712
00207149
1
1
9000228215
von
Bearbeiter
Projekt-Nr.
Dokument-Id.
SK00
Rundungshalbmesser
Längenmaße
Winkelmaße
Ersteller
Name
Datum
Revision
2/2-Wege-Geradsitz-Regelventil
Dok.art
XXX
Sprache
DE
Masse:
0.00
Zeichn.Nr.
Status
In Arbeit
DKI
18.07.12
Var.stl.:
g
An dieser Zeichnung beanspruchen wir Eigentums-
und Urheberrecht. Nur mit unserer Zustimmung
darf sie vervielfältigt, anderen mitgeteilt oder anderweitig verwendet werden.
Bürkert
Fluid Control Systems
D-74653 Ingelfingen
Version
Änderungsnr.
Änderungstext
Datum
Maße ohne Toleranzangabe
Materialnummer
Klass-Nr.
Maßstab:
Typ
Werkstoff
Benennung
Unterlagenart
Ers.f.
SW
Blatt
2712
00207149
1
1
9000228215
von
Bearbeiter
Projekt-Nr.
Dokument-Id.
SK00
Rundungshalbmesser
Längenmaße
Winkelmaße
Ersteller
Name
Datum
Revision
2/2-Wege-Geradsitz-Regelventil
Dok.art
XXX
Sprache
DE
Masse:
0.00
Zeichn.Nr.
Status
In Arbeit
DKI
18.07.12
Var.stl.:
g
An dieser Zeichnung beanspruchen wir Eigentums-
und Urheberrecht. Nur mit unserer Zustimmung
darf sie vervielfältigt, anderen mitgeteilt oder anderweitig verwendet werden.
Handwheel with
position indicator
(optional)
Opening for
lock
Position indicator in mm
= valve opening in mm
Angle seat body
Straight seat body
Fig. 2:
Valve types
6.3. handwheel
Each revolution of the handwheel changes the valve position by
1.5 mm (see “Fig. 3”). Clockwise rotation closes the valve, counter-
clockwise rotation opens it.
Only a low torque of
5–10 Nm is required to seal the valve.
6.4. position indicator
The value of the display is a distance in mm, usually the current
valve stroke (valve opening in mm). The display after the vertical line
shows the steps in 1/10 mm.
To set a defined flow, please refer to the flow characteristics or the
Kv value table (see data sheet).
If valves feature an interlock, the set position can be secured with a
lock.
english
Types 2000, 2012, 2702, 2712