FlexLink Блок очистки конвейера - Manual (Page 2)

2 Technical bulletin 5686EN-1
Chain Washing unit
System information
The washing unit is available for aluminium conveyor sys-
tems XS, XL, X85, XH and XK, and stainless systems
XLX and X85X.
Technical specification
Minimum top of chain height ............. 550 mm
Maximum conveyor length ................. 3 m
Maximum conveyor speed ................. 50 m/min
Operating requirements
Water supply attachment
Connection of water/cleaning system is made by G ½''
internal thread connection. Maximum/Minimum flowrate
required is 11–13,5 l/min.
Drainage Vacuum
Vacuum attachment is made by Ø32 hose connection.
Vacuum requirements are 23,5 kPa minimum with a
vacuum of 2x56 l/second.
Chain washer
Note!
The chain washing unit cannot be used with an
enclosed or guided type of conveyor drive unit.
Chain washer
Chain washer
Chain Washing Unit XS
Chain Washing Unit XL
Chain Washing Unit XLX
Chain Washing Unit X85
Chain Washing Unit X85X
Chain Washing Unit XH
Chain Washing Unit XK 8044023
8044024
8044025
8044026
8044027
8044029
8044028
Note. 1 m long beam section
Spare parts
Spray nozzle
Brush Ø80
Brush Ш180 8042716
8042673
8042672