EXP Computer DVD-780 (new revision) User Manual
Page 20
- 21 -
PLAYING A MOVIE
USING THE PCMCIA DVD-ROM CARD AND POWERDVD PROGRAM.
System requirement
•
Windows 95 OSR2 or Windows 98 operating system ONLY
•
Pentium MMX 233 Mhz is a minimum requirement (Pentium II 266
Mhz is recommended)
•
32 MB DRAM (Synchronized DRAM recommended)
•
CardBus Controller with DMA support
To check if your PCMCIA controller is a CardBus controller and also
has DMA support, Click on:
“Start”, >“Setting”, >“Control Panel”,>”System”
then “Device Manger” tab the screen below will display.
Double click on PCMCIA Socket and verify if your PCMCIA Socket is
Texas Instruments PCI-xxx CardBus Controller (except for TI PCI-
1221). If so, the PCMCIA controller has CarBus with DMA.
The PCMCIA DVD-ROM works best with the TI controller and
DMA. If your system is not using the TI controller, it is recommended
that you use the PCMCIA DVD-ROM with MPEG-2 decoder card for
a better performance.