EXP Computer DVD-780 (new revision) User Manual
Page 13
- 14 -
Windows 95 (Older Versions)
The following dialog will appear. If you are using the PCMCIA DVD-
ROM under Windows 95 for the very first time and your Windows 95 is
version 4.00.950 or 4.00.950a.
(If the dialog box does not appear and the DVD-ROM folder can not be
found in ‘My Computer’, please refer to the section titled “Enabling 32-bit
Card Support”.)
Select “Driver from disk provided by hardware manufacturer” and click the
OK button. Windows 95 will then prompt you to insert the manufacture’s
installation disk. Insert the PCMCIA DVD-ROM device driver disk into
your floppy drive. Specify the directory as A:\ (or A:\ win95) and select
OK. All the remaining installations will then proceed automatically.
Please note that it is not necessary to connect the PCMCIA DVD-ROM
every time you reboot your computer; connect it only when you need to use
it.