EXP Computer DVD-780 (new revision) User Manual
Page 16
- 17 -
SOFTWARE INSTALLATION FOR WINDOWS NT
Before You Begin
♦
Be sure the Windows NT you are to install is version 3.51 or higher.
♦
Since Windows NT does not support the “Hot Insert/Remove” feature,
the PCMCIA DVD-ROM should be connected with your computer
prior to starting Windows NT. Likewise, do not remove the PCMCIA
DVD-ROM before you shut down Windows NT.
♦
In Windows NT, the I/O and IRQ settings of PCMCIA DVD-ROM
can not be changed. Therefore, if the settings conflict with other
devices you are using, change the I/O or IRQ of other device to avoid
conflicts.
Installing the PCMCIA DVD-ROM under Windows NT
In Windows NT 4.0, you may select “Control Panel” under “Settings” from
the “Start” menu to open the “Control Panel” folder. double click the
“SCSI Adapter” icon)
Click “Drivers” tab, and a figure illustrated as below will be displayed.