EXP Computer DVD-780 (new revision) User Manual
Page 14
- 15 -
Enabling 32-bit Card Support
Note: The following procedures apply to the notebook that has install or
re-install the original release of the Windows 95 version 4.00.950 or
4.00.950a.
Your system should be ready for PCMCIA socket support prior to operating
the PCMCIA DVD-ROM. To check whether your computer has the
PCMCIA Socket supported, first, double-click on the “System” icon from
the “Control Panel” folder (you can select the “Control Panel” under
“Settings” from the “Start” menu to open the “Control Panel” folder).
Click on the Device Manager Tab. If “PCMCIA Socket” is found with a
cross (x) sign next to the PCMCIA Controller as the above figure shows, it
means the PCMCIA device driver is not using 32-bit Card Support.
Double-click on the PCMCIA Controller, and a dialog box will be
displayed as below. Place a check mark next to the current configuration of
the Device usage box, then select OK.