EXP Computer DVD-to-Go DVD_Mpeg2 - Manual (Page 9)

Launching the MARGI DVD Player
◊
Set your notebook’s display resolution to at least 800 x 600 pixels and 256 colors. If the display
controller and display panel support higher display resolution and color, you can set the system to these
levels (1024 x 768 and High Color – 16bit).
◊
Click the Start button, point to Programs, Margi, and then click MargiDVD. (Refer to the section
“Creating a Shortcut or Icon for the DVD Player” for instructions on how to create a shortcut).
◊
If this is the first time you are launching MargiDVD Player, the error message box (DVD-ROM
Missing – see figure 4 below) will appear asking for the location of the DVD drive. Select the correct
drive letter of your DVD-ROM drive (ex. If the DVD drive is setup for letter D, simply choose “Select”
button, and browse to the appropriate drive letter.)
Figure 4 - Locate the drive location where the DVD drive is located
NOTE
: This special setting is required to configure only one time for assigning the drive letter.
Margi-Billionton Launching the MARGI DVD Player - 4