EXP Computer CDS-620_820 - Manual (Page 28)

- 24 -
The device driver names of the major PCMCIA software are listed below:
Software/Device
Driver
SystemSoft
CardSoft
Phoenix Award
Cardware
IBM
ThinkPad
Socket Services SS365SL.EXE,
SS365LP.EXE,
SSCIRRUS.EXE,
SSDBOOK.EXE,
SVADEM.EXE,
SSVLSI.EXE
PCMSS.EXE SSPCIC.EXE IBMDSS02.SYS
Card Services CS.EXE PCMCS.EXE PCCS.EXE IBMDOSCS.SYS
Resource
Initialization Utility
CSALLOC.EXE PCMRMAN.SYS PCRM.EXE DICRMU02.SYS
IDE/ATA Driver ATADRV.EXE PCMATA.SYS
SRAM Card Driver MTSRAM.EXE
Flash Card Support MTAA.EXE,
MTAB.EXE,
MTI1,EXE
MTI2P.EXE
Memory Card Driver MEMDRV.EXE
Card Installation
Utility
CARDID.EXE PCMSCD.EXE PCENABLE.EXE AUTODRV.SYS
Card Services Power
Management
CS_APM.EXE $ICPMDOS.SYS
If you are not sure which PCMCIA software you are using, you may check it by typing TYPE CONFIG.SYS
at the DOS prompt followed by an ENTER key. The file should come up and look like one of the
following
Examples for CDS-940
SYSTEMSOFT PCMCIA SOFTWARE SAMPLE CONFIG.SYS FILE
LASTDRIVE=Z
DEVICE=C:\DOS\HIMEM.SYS
DEVICE=C:\DOS\EMM386.EXE NOEMS X=D000-D3FF
FILES=40
BUFFERS=20
STACKS=9,256
DEVICEHIGH=C:\CARSOFT\SS36SSL.EXE
DEVICEHIGH=C:\CARDSOFT\CS.EXE
DEVICEHIGH=C:\CARDSOFT\CSALLOC.EXE
REM** The REM’s should be removed from the following
REM** lines to enable memory and hard drive card support
REM** DEVICEHIGH=C:\CARDSOFT\ATADRV.EXE
REM** DEVICEHIGH=C:\CARDSOFT\MTSRAM.EXE
REM** DEVICEHIGH=CARDSOFT\MTDDRV.EXE
DEVICEHIGH=C:\CARDSOFT\CARDID.EXE
DEVICE=C:\CDROM\EXPCDS.EXE /P:340 /I:11 /D:MSCD001
DEVICE
=C:\CDROM\TXCS.SYS /P:340 /D:MSCD001
AWARD PCMCIA SOFTWARE SAMPLE CONFIG.SYS FILE
LASTDRIVE=Z