beautypg.com

EXP Computer CDS-620_820 User Manual

Page 11

background image

- 7 -

HARDWARE INSTALLATION

Before you begin, make sure you turn your system OFF before connecting the PCMCIA Portable
Multimedia Kit.

1.

Connect the PCMCIA interface card to the CD-ROM drive. Press firmly until the CD-ROM connector
is seated, and tighten the two screws on the cable connector.

2.

Place the CD-ROM drive in the horizontal position, for the CD-ROM is designed to operate only in
the flat position. Operating the CD-ROM drive in any abnormal position is not recommended.

3.

Connect the PCMCIA Sound Module to the PCMCIA interface card.

4.

Locate the PCMCIA slot of your computer, or consult your computer’s owner’s manual for the
location of the PCMCIA slot.

5.

Align the PCMCIA interface card with the arrow sign pointing toward the computer’s slot. (Please
note that the card is keyed to guide for proper insertion.)

6.

Slowly insert the PCMCIA interface card into the slot and press firmly until the connector is seated.

7.

Turn the system ON to install the PCMCIA CD-ROM device driver. Please follow the Software
Installation procedures.