beautypg.com

EXP Computer CD-940E User Manual

Page 20

background image

- 15 -

ADDING PCMCIA SUPPORT

PCMCIA Support can be automatically installed during OS/2 installation
or it can be installed through Selective Install after OS/2 installation.

To check or install PCMCIA support, perform the following steps:

1. Open OS/2 System.

2. Open System Setup.

3. Open Selective Install.

4. Check the System Configuration window to see if PCMCIA Support

has been installed as displayed below. If so, you may exit now,
otherwise, perform the following steps to continue.

5. Select the check box to the left of the PCMCIA Support to display

the Select PCMCIA system window.