EXP Computer CD-940E - Manual (Page 15)

- 10 -
6. After the installation is completed, please refer to the next section
titled “Enabling 32-BIT CARD SUPPORT”.
ENABLING 32-BIT CARD SUPPORT OF WINDOWS 95
Your system should be ready for PCMCIA socket support prior to
operating the PCMCIA CD-ROM. To check whether your computer is
PCMCIA Socket supported, first, double-click on the “System” icon from
“Control Panel” folder (you can select the “Control Panel” under
“Settings” from the “Start” menu to open the “Control Panel” folder).
Click on Device Manager Tab, if “PCMCIA Socket” is found with a cross
(x) sign next to the PCMCIA Controller as the Figure shown below, it
means the PCMCIA device driver is not using 32-Bit Card Support.