EXP Computer CD-620 - Manual (Page 17)

In this case, double click on the PCMCIA Controller, and a dialog box will be
displayed as below. Please place a check mark next to the current configuration of
Device usage box, then select OK.
Figure 12
After the PCMCIA 32-Bit Card support is installed, Windows will ask you to reboot
your computer. Then you should refer to the first section titled “Using CD-ROM
Under Windows 95” to configure the PCMCIA CD-ROM.
If the PCMCIA Socket is not found, then you must add a PCMCIA socket to your
system. Please click on the “Add New Hardware” icon in the Control Panel folder
and select “PCMCIA socket”. Select the appropriate type of PCMCIA Controller
that matches with yours and follow the on-screen instructions.