EXP Computer CD-620 - Manual (Page 10)

HARDWARE INSTALLATION
OFF
connecting the PCMCIA CD-ROM to your computer.
Turn over the CD-ROM drive, locate the
ROM drive. Lift and take out the card from the
2.
horizontal position.
Make sure that the PCMCIA interface cable is
the back panel of the CD-ROM drive.
Refer to the computer user’s manual to locate
5.
sign pointing towards the computer’s slot. (Please
insertion.)
Slowly insert the PCMCIA interface card into the
7.
power source.
PCMCIA Socket
=> DC/BATT
(Make sure the AC adapter is properly connected or the batteries are installed)
Turn the system ON to install the PCMCIA CD-ROM device driver.
Connect the PCMCIA interface cable to CD-ROM drive before inserting
the PCMCIA interface card into your computer.
connect/disconnect the PCMCIA interface cable to/from the CD-ROM
drive while the card is inserted and the system is in the power-on state.
Figure 6
Figure 7