eLine Technology PRO3 Effio P & S - Manual (Page 19)

-36- -35-
CAMERA ADJUSTMENT CAMERA ADJUSTMENT
OTHERS
SETUP MENU
EXPOSURE AUTO
PICT ADJUST 
WHITE BAL ATW
WDR 
DNR 
DAY/NIGHT AUTO
PRIVACY 
MOTION DET 
OTHERS 
EXIT SAVE ALL
All functions outside the normal settings required are all withing the special menu
OTHERS
LANGUAGE ENGLISH
LENS AUTO
SYNC INT
CAM TITLE OFF
WPC 
VERSION 
CAMERA RESET
RETURN
• LENS MANUAL / AUTO 
AUTO IRIS
TYPE DC
MODE AUTO
SPEED 064
RETURN
MODE: AUTO,OPEN,CLOSE
Sets the type of control to be use over a mechanical iris.
SPEED: 000-255
Sets the convergence speed of the mechanical iris.
• CAM TITLE OFF / ON
Camera title can be shown as name on the screen as chosen.
CAMERA TITLE SETUP
CAMERA
ABCDEFGHIJKLMNOPQRSTUV
WXYZ0123456789-!#$%&’
()_`.:;<=> @^*./^*X+/
CHR1 CHR2
 CLR POS
RETURN
Use Up/Down/Left/Right to move around. CHR1/2 changes the selection fonts to
alternative selection, CLR will clear info. POS allows position change.
• WPC
WPC
PLEASE COVER THE LENSENTER PW
RETURN
This allows for white pixel compensation, to correct for CCD defects or dead pixel.
Lens cap should be put to generate a black video signal for function to work.
Permit no light to enter the sensor, respectively, the Up,Down, left, right, middle
button to start the highlight of compensation. Prompts are finished, press the
middle button to exit.
• RS485
Select ID on RS485 bus for camera, not fitted on all camera types with Effio-P.