eLine Technology EYS-VMS eyStream User Manual Part2 - Manual (Page 6)

106
To save the automatic rule, click the Apply button.
To add other automatic rules, repeat the original procedure.
Note
To delete an automatic rule, click the button and click the Apply button to
save changes
Conditions for Setting Automatic Rules
Before setting automatic rules to be executed when a detection tool is triggered, you must make
sure that the following objects have been created and configured.
Automatic Rule Object which must be configured
Recording to Archive and Initiation of an Alarm Archive
Switch to the layout with the minimum
number of cells to display the selected video
camera -
Switching Relays Relay
Switching to a PTZ camera preset Telemetry (you must set the presets using the
PTZ device control panel)
Audio notification Speaker
E-mail notification E-mail
SMS notification SMS
If a condition for setting an automatic rule is not met, the rule cannot be selected for adding:
eLineTechnology.com 303.938.1133