eLine Technology EYS-VMS eyStream User Manual Part2 - Manual (Page 10)

110
2. In the Telemetry list (1) select a Telemetry object that matches the PTZ device of the PTZ
video camera. The pan/tilt unit of any PTZ camera can be used, including one tied to
another server (if it is enabled).
3. In the Preset number list (2), select the number of the camera preset to which the camera
should switch when the detection tool is triggered.
4. To save changes, click the Apply button.
Configuration of switching to a PTZ camera preset is now complete.
Voise notification
To configure voise notification when a detection tool is triggered, you must perform the following
steps:
1. Add the Voise notification rule (see Adding an automatic rule ).
2. In the Speaker list (1), select the Speaker object corresponding to the speaker on which
you wish to play the sound notification.
3. In the During field (2), enter the time in the format HH:MM:SS during which the sound
notification is to be transmitted.
4. To save changes, click the Apply button.
Configuration of sound notification when a detection tool is triggered is now complete.
E- mail notification
To configure e-mail notification when a detection tool is triggered, you must perform the following
steps:
1. Add the Send E-mail rule (see Adding an automatic rule )..
eLineTechnology.com 303.938.1133