eLine Technology EYS-VMS eyStream User Manual Part2 - Manual (Page 16)

116
2. In the Mode list (3), select the desired mode of recording the video stream from the video
camera to the archive.
Recording mode Description
No recording The video stream is not recorded to archive
Continuous recording The video stream is recorded to archive
continuously
Scheduled recording The video stream is recorded to archive
according to specific schedules
Recording on demand The video stream is recorded to archive
when detection units are triggered or when
an alarm is manually initiated
3. If scheduled recording has been chosen, in the corresponding drop-down list (3), select the
schedule (see the section
Configuring schedules ) according to which recordings will be
written to the archive.
4. If you need to record to archive using scaling, select Yes in the drop-down list (3).
5. If you choose recording with scaling, enter the maximum frame rate when recording the
video stream from a video camera to the archive in the Max frame rate field (3). If the
frame rate of the video stream coming in from a video camera is less than the indicated
value, the recording will be made at the original and not the maximum rate.
6. The default archive of a video camera is the archive to which images from a given video
camera are recorded during user-initiated alarms. For each video camera one and only one
default archive must be set. The first archive to which recording of a video stream from a
video camera was configured automatically becomes the default archive.
If you need to make another archive the default one for this video camera, select Yes in the
Default archive list for that other archive (3).
7. In the Pre-alarm recording time field (3), enter the buffering time of the video stream
from the camera in seconds. This value should be in the range [0, 120].
eLineTechnology.com 303.938.1133