DE DIETRICH KALIKO TWH 200E - TWH 300E - TWH 300EH - Manual (Page 52)

5.7.2. List of the parameters
Parameters Description Adjustment range Factory
setting
P 01 DHW setpoint in Auto mode 40 to 70 °C 55 °C
P 02 DHW set point in Eco mode 40 to 65 °C 55 °C
P 04 Choice of mode for the DHW Comfort period:
4 0 = Use the time programs.
4 1 = Use the electricity tariff information input. Tells you whether or not
domestic hot water production is permitted (HP1 = not permitted => Contact
closed, HC0 = permitted => Contact open).
4 2 = Use the electricity tariff information input. Tells you whether or not
domestic hot water production is permitted (HP1 = not permitted => Contact
open, HC0 = permitted => Contact closed).
4 3 = Use the time programs. The status of the electricity tariff information
input is used to activate the Boost function with compressor only (HP1 =
Boost deactivated => Contact closed, HC0 = Boost activated => Contact
open).
4
4 = The status of the electricity tariff information input is used to activate
the Boost function with compressor only (HP1 = Boost activated => Contact
open, HC0 = Boost deactivated => Contact closed).
4
5 = The status of the electricity tariff information input is used to activate
the Boost function with compressor and back-up (HP1 = Boost deactivated
=> Contact closed, HC0 = Boost activated => Contact open).
4
6 = The status of the electricity tariff information input is used to activate
the Boost function with compressor and back-up (HP1 = Boost activated
=> Contact open, HC0 = Boost deactivated => Contact closed).
0 - 6 0
P 06 Automatic switch to summer time (last Sunday in March) and winter time (last
Sunday in October):
4 0 = Function not active (for countries where the time change is done on
other dates or is not in use)
4
1 = Function active
0 - 1 1
P 07 DHW setpoint in Boost mode 40 to 70 °C 62 °C
P 17 Protection by impressed current anode
4
0 = Deactivation
4
1 = Activation
0 - 1 1
P 18 Water volume contained in the DHW tank (x 10 l) 6 - 255 27
P 19 Water volume for one bath (l) 10 - 255 120
P 20 Maximum duration of the Boost mode (h) 1 - 10 6
P 21 Measurement unit
4 0 = °C
4
1 = °F
0 - 1 0
P 22 Back-up type
4 0 = None
4
1 = Electrical back-up
4
2 = Hydraulic additional heating
0 - 2 1
P 23 Time delay for starting the electrical or hydraulic back-up in Automatic mode
(Hours)
0 - 10 5
P 24 Compressor start-up time (seconds) 60 - 255 120
P 25 Management of the fans in domestic hot water production mode
4 0 = Automatic
4 1 = Average speed of fan rotation
4
2 = Maximum speed of fan rotation
0 - 2 0
5. Commissioning TWH 200E TWH 300E TWH 300EH
50 03/02/2014 - 300026515-001-03