Accessories – Drill Doctor XP User Manual

Page 15

www.drilldoctor.com

USA and Canada Only

See Warranty Card insert for countries outside the USA and

Canada.

Your Drill Doctor is warranted to be free of defects due to work-
manship or design for 3 years from the purchase date. If your
Drill Doctor fails to operate, or if any operating problem occurs,
contact Drill Doctor Technical Service at:

1-888-693-7455

(toll-free USA and Canada only)

1-541-552-1301

Please call 8:00 AM - 3:30 PM Pacific Time.

Do not return this product to the store where you purchased it.
Do not attempt any service or repairs other than those suggested
by a Drill Doctor Technical Service Representative (TSR). During
the period of warranty, Drill Doctor will, at our discretion, repair
or replace this product free of charge and refund postage or ship-
ping charges providing that the following conditions are met:

1. A copy of the proof of purchase is provided.

2. The product has been operated for the purpose intended as

described in the operating instructions and has not been
abused or mishandled in any way.

3. The product has not been dismantled and no service or repairs

have been attempted other than those suggested by a Drill
Doctor TSR.

4. The Return Goods Authorization number (RGA #) (assigned

by the Drill Doctor TSR) is written on the shipping label.
Please make certain to package items in such a way as to
eliminate further damage during shipping. Ship via a traceable
carrier and properly insure the package.

No CODs are accepted. Unapproved shipping charges are non-
refundable.

Complete and mail back the Warranty Registration & Customer
Survey, or register online at:

www.DrillDoctor.com

Please Fill in the Following for Your Records.

Drill Doctor

Model #: __________ __________ ___________

Date of Purchase: _______ / _______ / _______

Purchased from:________________________________________

Remove worn wheel by twist-
ing slightly and lifting wheel
off shaft. Install new wheel
and reinstall wheel retainer
and screws. Don’t over-tight-
en mounting screws. Remove
the wrench and replace the
Wheel Access Cover before
turning on the machine.

Accessories

Order accessories through our website: www.DrillDoctor.com,
or by contacting us at the phone number listed on the
Warranty page (page 27), or at the retailer where you
purchased your Drill Doctor.

WARNING:

The use of any accessory other than one recommended in
this user’s manual may present a risk of personal injury.

3/32” to 3/4” Large Bit Chuck

Part # DA70100PF

3/32" to 1/2" Left-handed Bit Chuck

(for 3/32"-1/2" reverse twist drill bits)

Part # DA02105PF

Standard Diamond Sharpening Wheel (180 grit)

Part # DA31320GF

Coarse Diamond Sharpening Wheel (100 grit)

Part # DA31325GF