Aiwa XR-MS3 - Manual (Page 9)

En
ENGLISH
9
RADIO RECEPTION
MANUAL TUNING
MONO
SHIFT
DISPLAY
TUNER/BAND
FUNCTION
POWER
DISPLAY
1
2
1 Press TUNER/BAND repeatedly to select the
desired band.
FM AM
You can select the tuner function by pressing FUNCTION on
the main unit repeatedly. In this case, select the desired band
with TUNER/BAND.
2 Press f or g to select a station.
Each time the button is pressed, the frequency changes.
When a station is received, "TUNE" is displayed.
During FM stereo reception,
1 is displayed.
About the level indicator
The above display automatically changes to the level indicator
after 4 seconds.
The level indicator shows an approximate playback sound level.
To search for a station quickly (Auto Search)
Keep f or g pressed until the tuner starts searching for a
station. After tuning in a station, the search stops.
To stop the Auto Search manually, press
f or g .
• The Auto Search may not stop at stations with very weak signals.
When an FM stereo broadcast contains noise
Press MONO on the remote control so that "MONO" lights up on
the display.
Noise is reduced, although reception is monaural.
To restore stereo reception, press this button so that "MONO"
disappears.
GRAPHIC EQUALIZER
This unit provides the following three different equalization curves.
ROCK: Powerful sound emphasizing treble and bass
POP: More presence in the vocals and midrange
JAZZ: Accented lower frequencies for jazz-type music
Press JOG MODE repeatedly until "EQ" appears on the display.
Then turn VOLUME/MULTI JOG right or left to select one of the
three equalizer modes or the off position.
OFF
To select with the remote control
Press EQ repeatedly.
Sound adjustment during recording
The output volume and tone of the speakers or headphones may
be freely varied without affecting the recording.
SOUND
RADIO
RECEPTION