Specifications – Aiwa XR-MS3 User Manual
Page 22

22
ENGLISH
SPECIFICATIONS
Main unit
FM tuner section
Tuning range
87.5 MHz to 108 MHz
Usable sensitivity (IHF)
13.2 dBf
Antenna terminals
75 ohms (unbalanced)
AM tuner section
Tuning range
530 kHz to 1710 kHz (10 kHz step)
531 kHz to 1602 kHz (9 kHz step)
Usable sensitivity
350 µV/m
Antenna
Loop antenna
Amplifier section
Power output
10 W + 10 W
(50 Hz to 20 kHz, THD less than
1%, 6 ohms)
15 W + 15 W
(1 kHz, THD 10%, 6 ohms)
Total harmonic distortion
0.15% (6W, 1 kHz, 6 ohms, DIN
AUDIO)
Input
VIDEO/AUX: 500mV
Outputs
SPEAKERS: accept speakers of 6
ohms or more
PHONES (stereo mini jack):
accepts headphones of 16 ohms
or more
DIGITAL OUT (OPTICAL) jack
Compact disc player section
Laser
Semiconductor laser (
λ
= 780 nm)
D-A converter
1 bit dual
Signal-to-noise ratio
85 dB (1 kHz, 0 dB)
Harmonic distortion
0.05 % (1 kHz, 0 dB)
Wow and flutter
Unmeasurable
Cassette deck section
Track format
4 tracks, 2 channels stereo
Frequency response
CrO
2
tape: 50 Hz to 16000 Hz
Normal tape: 50 Hz to 15000 Hz
Signal-to-noise ratio
60 dB (Dolby B NR ON, CrO
2
tape
peak level)
Recording system
AC bias
Heads
Recording/playback head
×
1,
erase head
×
1
General
Power requirements
120 V AC, 60 Hz
Power consumption
45 W
Standby power consumption
1.9 W (power-economizing mode
set to ON)
Dimensions of main unit (W
×
H
×
D)
100
Ч
210.6
Ч
271.5 mm
(4
Ч
8
3
/
8
Ч
10
3
/
4
in.)
Weight of main unit
3.8 kg (8 lb 6 oz.)
Speaker system
Cabinet type
2 way, bass reflex (magnetic
shielded type)
Speakers
Woofer:
85 mm
Tweeter:
22 mm dome type
Impedance
6 ohms
Output sound pressure level
86 dB/W/m
Dimensions (W
×
H
×
D)
100
Ч
206
Ч
188 mm
(4
Ч
8
1
/
8
Ч
7
1
/
2
in.)
Weight
1.5 kg (3 lb 5 oz.)
Specifications and external appearance are subject to change without
notice.
• US AND FOREIGN PATENTS LICENSED FROM DOLBY
LABORATORIES LICENSING CORPORATION.
The word "BBE" and the "BBE symbol" are trademarks of BBE
Sound Inc.
Under licence from BBE Sound Inc.
DOLBY NR
Dolby noise reduction manufactured under license from Dolby
Laboratories Licensing Corporation.
"DOLBY" and the double-D symbol
h
are trademarks of Dolby
Laboratories Licensing Corporation.
COPYRIGHT
Please check the laws on copyright relating to recordings from
discs, radio or external tape for the country in which the machine
is being used.
NOTE
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause har mful interference to radio
communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of
the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on circuit different from
that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician
for help.
CAUTION
Modifications or adjustments to this product, which are not
expressly approved by the manufacturer, may void the user's
right or authority to operate this product.