Nat devices, Figure 4.3: single nat configuration (client only) – Avocent DSView 3 User Manual
Page 71

Chapter 4: Basic Operations 49
NAT Devices
NAT devices enable a company to use more internal IP addresses than they have assigned to
managed appliances. The IP addresses are not exposed outside of the NAT device.
NAT devices are typically used with a DSL broadband router. A DSView 3 software client is
connected to the NAT device, as shown in Figure 1.6, which then connects to the corporate
network using a VPN.
Figure 4.3: Single NAT Configuration (Client Only)
2
Firewall
8
VPN
3
Site A
9
DSView 3 Software Client
4
Target Devices
10
Site B
5
Hub Server
11
Target Devices
6
Spoke Server
Table 4.5: DSView 3 Software System on a VPN Descriptions
Number Description
Number
Description
Table 4.6: Single NAT Configuration (Client Only) Descriptions
Number Description
Number
Description
1
DSView 3 Software Client
7
Firewall
2
Private
8
Private
3
NAT Device
9
DSView 3 Server
4
Client
10
Managed Appliance
5
Public
11
Corporate
6
VPN
5
1
10
7
11
6
9
4
3
2
8