Avocent DSView 3 User Manual
Page 381
Appendices 359
Appendix E: Regaining Access to the DSView 3 Software
Access to a DSView 3 software system may be lost due to reasons such as:
•
Being locked out by the DSView 3 software
•
Deleting the last DSView 3 software administrator
•
Forgetting the DSView 3 software administrator password
To regain access to a DSView 3 software system:
1.
Contact Avocent Technical Support. You will be provided with the resetpassword.zip
archive file.
2.
Extract the resetpassword.zip archive file into the
directory on the DSView 3 software hub server using a third party product.
3.
From the Control Panel, select Administrative Tools - Services and stop the Avocent DSView 3
software service.
4.
Open a terminal window, change directories to the
tory and enter
resetpassword.bat
. A code successfully generated message will appear in the
terminal window, along with a request code in the same format as the following:
341D3DAD-E71A15B1-66D77BBD-E655BB6C
NOTE: Request codes are valid for only four hours.
5.
Contact Avocent Technical Support and provide the generated request code.
6.
Avocent Technical Support will provide you with a reset code.
7.
In a terminal window, enter
resetpassword.bat
. A Message reset performed
successfully message will appear in the terminal window, along with the Administrator user-
name and password for the DSView 3 management software.
8.
From the Control Panel, select Administrative Tools - Services and restart the Avocent DSView
3 software service.
9.
You may now log into the DSView 3 management software.